How to make a St. George ribbon with his own hands made of beads, paper, ribbons? Decoration of St. George's ribbon with his own hands

An integral accessory in the celebration of the Victory Day is the St. George ribbon. Regardless of age, status and political conviction, every sane person seeks to express his love and gratitude to the Motherland, decorating his image with the symbol of victory.

Contents

  • How to make and beautifully decorate a St. George ribbon with your own hands: photo
  • George ribbon with a tricolor with your own hands
  • George ribbon with your own hands for kindergarten
  • George ribbon with your own hands hooked
  • St. George's ribbonHands of tapes
  • Beautiful St. George ribbon with his hands of beads
  • Video: Knitting with beads. Master class "George ribbon"
  • Original geyorievskaya ribbon with your hands
  • Video: kanzashi rose by 9 May
  • How to make St. George ribbon with their hands out of paper?
  • How to make a St. George Ribbon Kanzashi own?
  • Video: Carnation of Kanzash. Brooch on May 9

How to make and you arrange St. George ribbon with your hands: the photo

George Ribbon decorated with a brooch
made with their own hands
George Ribbon decorated with a brooch made with their own hands
George Ribbon decorated with a broochMade by own hands
St. George ribbon decorated with a spike made by own hands
St. George ribbon decorated with a brooch made by his own handss

Banty-georgievskaya-ribbon-loop-brooch-kanzashi George Ribbon decorated with a brooch made with their own hands

George Ribbon decorated with a brooch made with their own hands
George Ribbon decorated with a brooch made with their own hands
George Ribbon decorated with a brooch made with their own hands
George Ribbon decorated with a broochMade by own hands
St. George ribbon decorated with a brooch made by own hands
George ribbonMade of beads
George ribbon in the form of a bow made by own hands
St. George ribbon with own hands tricolor

George ribbon with a tricolor with his own hands

For work you will need:

  • ribbons of blue, Red and white tone
  • matches
  • glue
  • scissors
  • tweezers
  • pin
  • for brooch - accessories

Cut from a tape of each color into three squares

Fold the square diagonally to make a triangle.

Bend in half.

Tweezers tighten, the third folded triangle. We process the edges of the flame. Then we follow that the bottom of the tips is glued together.

The first lobe is ready.

In this way, we make subsequent blanks. Three pieces of each color.

Remove the uneven edges with scissors.

Form the first branch of the tricolor. Attach the petals to each other, with the help of glue, so that each subsequent was slightly higher than the previous one.

Between the first and second white lobe we fix the blue.

Next, we glue between the second and third.

And the third - in the center.

In the same sequence, we glue the red petals between the blue ones.

The first branch is formed.

Duplicate in the same way as the manufacture of the second branch.

  • We get the St. George ribbon. Fold it in a loop. The center glue
  • fix the reverse side attach small pin
  • On both sides of the resulting preform sticking tapes trikolorovyh twigs

  • The center add additional petals made of red ribbon. Of which we form the flower

The George ribbon with the flower of the tricolor is ready!

St. George ribbon with your own hands for kindergarten

It will be very interesting for children to make their own hands not a complicated fake for the holiday of victory.

  1. Prepare clean sheets of white, black and orange paper
  2. On a white sheet we measure strips 1 cm wide
  3. We put black and orange sheets in strips of the same width
  4. Depending on the age of the children: either we give the scissors and cut them ourselves,or caregiver cuts himself stripes of orange and black paper on
  5. drawn by the strip on white paper glue alternately cut strips, alternating colors

George Ribbon with their hands crucom

Very originally obtained knitted belt hook.

  1. We take cotton reel threads
  2. We select a series of air loops, brown for the selected length of the tape
  3. Each row starts with three air loops up
  4. We make 6-9 rows with columns without crochets or semicircles
  5. Then 6-9 rowsorange knit thread
  6. Then again the brown band, orange brown
  7. Finish
  8. When changing the thread color is not quenched by the stretch of
  9. edge optionally edge tie

The effectivenessnaya tape, which from a distance does not distinguish from the factory

George Ribbon with their hands out ribbons

  • Take satin brown or orange tape
  • Cut out two strips of cardboard identical. The width of the larger ribbon
  • On cardboard stencils making slits with a knife, according to the width of the desired band
  • Put the ribbon between trafaretami. Plotno hold that it had not slid
  • Damage paint from spray to brown belt in orange. If the tape is orange, then the paint is brown
  • In the same way the applied paint on the other side

Beautiful St. George's ribbon with your own hands from beads

For work you will need:

  • any number of beads, but notLess than 40 grams, brown and orange color
  • Threads Iris Orange Color
  • Threads Kamtex Dandy Brown;
  • hook №1-1,2;
  • wire for beadwork.

Knitting:

  • Knitting starts at the selected length
  • In the 1st row: the typed chain of air loops with orange threads is tied with connecting loops.
  • From the next row we knit with beads columns without a crochet, alternately strips of black and orange color.
  • Seal the edge of the ribbon with columns without crochet, orange thread with beads, adding wire for beadwork. Thus, avoid folding the tape, when operating
  • We pass around the tape with closing loops of orange color
    Ideal decoration option for both clothes and handbag

Video: Knitting with beads. Master class "George ribbon"

OriginalSt. George ribbon by one's own hands

Prepares materials and tools:

  • St. George's ribbon
  • Satin ribbons of black and orange color
  • PiNtset
  • Scissors
  • Adhesive
  • Pin
  • Matches or lighter

Let's start:

  1. Cut seven black and fourteen squares from a satin ribbon to five centimeters
  2. Cauterize the flame edging
  3. Use a tweezers to add a square into a triangle that folds again.
  4. For petals bend again triangle
  5. irregularities prune
  6. Handle edge flame
  7. resulting excess tail cut off
  8. Pass flame bleed
  9. Black Square add up twice diagonally
  10. applied to
  11. orange tape Get three petals, In which the black in the center, orange on the edges
  12. Superfluous corners of the petal trim
  13. Cauterize the flame for processing and joining the ends
  14. We make seven three-layerGOVERNMENTAL petals
  15. connects the workpiece in the form of ear
  16. Centered attach the black or white beads in a row
  17. Guards band folds into a loop
  18. Secures glue
  19. Top glue resulting spike
  20. Brooch anchoring pin

Video: kanzashiRose by May 9

How to make a St. George ribbon with your own hands made of paper?

George Ribbon
of paper is very quick and easy way

kvillingovuyu We buy paper:

  • black and orange 5 mm
  • Orange 1.5 mm

1 way

  1. Takepaper size A4
  2. Damage adhesive strips
  3. glue starting from the center of the sheet, alternately: orange-1.5 mm, 5 mm armature-, orange-5mm 5mm armature-, orange-5 mm, 5 mm black, Orange-1.5 mm
  4. We paste it in this way necessaryMy number of finished products
  5. Cut out the received strips

2 way

  1. Take a wide adhesive tape
  2. Fasten to the surface with a sticky side up
  3. We hang down the adhesive tape from the surface
  4. We paste the previously prepared strips in the same sequence asIn the first method
  5. Cut
  6. Spreads on the table smooths the surface removing all the irregularities

3 version

  1. Take the orange two-way buASU
  2. Drawing in Word black stripes
  3. We print
  4. Cut

How to make St. George ribbon kanzashi their own hands?

necessary materials and tools:

  • 60 cm tape
  • little beads or rhinestones
  • -pin fastener
  • centimeter
  • scissors and tweezers
  • Lighter
  • gun glue


Cut squares7 cm in length.

tweezers add up the square, as in the photo

still add up the times.

Collapsed into the received element.

Bend the bottom edge up. We process with fire.

We get the petal: the view from the front and from the back.

We make five such blanks.
We take 20 cm tape. The edges are treated with fire, that would not be showered. You can make the ends in the form of a flag

Fold the tape, as in the photo. We fix it with glue.

On the left side, attach a pin with a needle thread.

Glue the harvested petals in the form of a flower. Decorate with rhinestones or beads.

Even a small child can make a ribbon at home.

If you want some special option, a little effort, and your tape will be the only copy.

Video: Carnation of Kanzash. Brooch for May 9