you drink a drink, Mr.hand was raised to throw the bottle? Attracted an unusual form or visited the idea of an interesting design of things?
Congratulations: from now on you have joined the ranks of fans of decoupage! Let's see how you can beautifully and uniquely decorate the most ordinary bottle.
Decoupage of wedding bottles of champagne and glasses with napkins, ribbons, flowers
For decorating bottles and wine glasses for the wedding, you need
to use as follows:
Surface to be degreased with .To do this, wipe it with alcohol
Then applies a special primer for decoupage , which is sold in stores for creativity. However, acrylic paint as a base, too, will fit perfectly. The paint is applied most usual foam sponge that is commonly used to create makeup
IMPORTANT: Often there is need for a second layer of acrylic lacquer.
Once the paint dries, can be treated with a bottle of glue for glass, and then attach the cloth. It is recommended to use a special pistol. Do not worry about the fact that the glue is formed in the form of ampoules - they are melted in the gun
After 60 minutes the bottle should be covered with with several layers of acrylic lacquer
After another hour, can start painting the bottle day
Now you can decorate to your taste sequins, ribbons, flowers, lace, beads
glasses decorated by the same principle as that of a bottle. It is recommended to tape two glasses or two bottles as a symbol of a strong relationship.
If you want something unusual, one bottle can be issued in the male category, and the second - in the women's. Also, things that capture the passions of the newlyweds will be interesting enough.
Decoupage of bottles for a birthday for a man
A good option for bottle decoration for a birthday for a man- design with a picture of the birthday:
sure to degrease the surface with alcohol , first removing the all the stickers on it
IMPORTANT: the remains of the old adhesivee must be removed, otherwise it will affect the quality of decoupage.
Print two photos for the forward and reverse engineering
Pour in some capacity a small amount of water. Immerse the photograph in the water face down - this will help laminate the sheet. Holding the image of a couple of minutes in the water, gently with your fingers roll excess layers so that there was only one thin color
Meanwhile on the bottle in accordance with theThe size of the photo indicates the place under it. This place is smeared with acrylic lacquer. top inside-glued Photo
IMPORTANT: Smooth good paper - bubbles and wrinkles should not be.
After the picture is dry, you should stick to it second. Only this time the image will be drawn to the viewer. Smooth picture
The most common syringe type texture paste, which can be purchased in the store for creativity. Extrude it on the outline of the photo .You can also make the inscription
To make the bottle look more elegant, you can color the with some patterns
Do not think that the design for a gift a man can not be bright. Here are some examples of decoupage of a gift bottle:
Decoupage bottles birthday for women
Quite interesting and unusual effect obtained in the case, if you make etc. blend fabric. You can take any unnecessary tights:
Degrease the surface of the bottle
Cut out the part of the tights soak with a mixture of consisting of water and PVA
IMPORTANT: The proportion of the adhesive and water should be 1 to 1.
AfterImpregnation solution tights are laid out on the bottle in the form of waves, fold. Do not forget to leave room for gluing napkins
Wait completely dry material
Make primer acrylic paint or a special compound, purchased in the store for creativity
remains only toned to your taste, decorate
very good option for decoupage bottles in gift to a woman - n rikleit lace. Small chain, beads are also suitable.
Decoupage egg shell on
Such a decoupage will give volume to patterns on things, making the bottle really unique. will be needed:
shell, cleaned of dirt and films
wide flat brush
special napkin for decoupage
Lac, which will be formalized topcoat
Throw the shells of into small pieces before applying to the bottle. However, the dimensions vary depending on the idea
IMPORTANT: Some masters stick large pieces of shell to the surface, and then they crush them with a blunt object, placing them with a toothpick. However, beginners should not resort to this method.
Treat the surface of the bottle with glue. Beginning is recommended with a neck. The pieces of are applied to the glue and spread with a toothpick. Do not forget to lightly press down the material
, but should not touch the bottom. top coat the entire workpiece acrylic white lacquer
So how to identify cracks, should cover the surface of the bottle with a sponge paint brown shades .Better to mix several colors to get the desired
Without waiting drying varnish, wipe the bottle with a damp cloth. Thus, the varnish will remain only in the cracks, which is required
Cut out the napkins of the desired images. Separate from them the top layer
Now select drawings for the bottle and apply glue
on top IMPORTANT: Distribute the adhesive from the center to the edges using a wideBrushes.
final stage - application of acrylic lacquer
decoupage bottle on New year
for this decoupage us need:
Acrylic white primer
Finishing nail fixation cover
glitter golden-red hue
Sandpaper with fine grain
palette knife, with which artists remove excess paint or primer is applied
The first thing the needs to do is to clean the bottle of labels and glue marks. For this, it should be placed in a container with water at room temperature - so the labels are disconnected. But it is easy to get rid of the glue residues with the help of children's cosmetic oil
IMPORTANT: Do not forget to rinse the bottle with dishwashing detergent if you have used cosmetic oil.
Then alcohol degrease glass
Sponge should be applied with a primer. It is recommended to make the first layer thin, and then to dry it with a hair dryer - so the soil will lie on the glass in the best way. The second layer should also be dried properly.
Remove the images you want to paste from the napkin. Remove the two lower layers, leaving only the colorful
IMPORTANT: Images should be torn off rather than cut, because lacerated edges are easier to disguise with the background so that they merge with it.
The top layer needs to be put image down on the file. You need to pour a little water on the napkin. Spread all the irregularities on the napkin. You can help yourself with a brush. After a while, remove the excess water
T from the paper. Now attach the file to the bottle so that the underside of the napkin is attached to the bottle. Gently smooth the folds
Pulling one corner of the file, remove it. The napkin remains on the bottle
Smooth the folds again and cover the bottle with glue or acrylic lacquer. Allow the bottle to dry properly
IMPORTANT: Move from center to edge.
Small folds, which probably still remain, should be dealt with separately. Remove them easily thanks to sandpaper with small grains. Carry out the emery along the unevenness
The turn of the finishing varnish has come
Now we need to work on the main background. Sponge apply white and blue acrylic lacquer without forgetting to remove excess from the sponge
Mix the shades with which you should work the edges of the picture - can not do without this if you want to achieve naturalnessImages
Take unnecessary toothbrush and use it make splashes of white paint
Once again apply top lacquer
done with a syringe inscription
The image should be voluminous. For this, a transparent paste with glass pieces is carefully applied to the bottle - it will simulate the ice. Acrylic paint of silver shade will also help
IMPORTANT: This is where the palette knife comes in handy. It is most convenient for them to apply such a coating.
Another great way to decorate a bottle for the New Year is to sprinkle it with large crystals of salt. The technique is simple - the salt is attached to the glue.
Decoupage of bottles with napkins
Especially elegantly looks decoupage with napkins in the case if is used in the process of using the Crackles varnish - it helps to create the effect of antiquity. So, in such a case need :
alcohol to degrease the glass
flat brush made of synthetic fibers
So, first of all do surface degreasing and cleaning from old
labels. Now cover the bottle with acrylic lacquer .Try to make the layer smooth. Apply best with a sponge
IMPORTANT: As for the color scheme, keep in mind that the substrate should be the color that is planned for the cracks. Therefore, if the bottle itself is white, then the basis is desirable to make black or dark brown.
Wait until the varnish dries. You can use a hairdryer
Now apply top coat on top. This layer is not needed to dry.
Next, acrylic lacquer is applied close to each other with neat brush strokes. This layer is important to dry properly
At this stage we start drawing the pattern from the napkin. Separate the top layer. Tear off all unnecessary, while trying to prevent even edges that are then difficult to make natural
Dilute PVA in water. Apply the solution to the surface of the picture attached to the bottle. Move from the center to the edges
Coat the surface. If desired, work out the details
Decoupage bottles of toilet paper
So for decoupage bottle of very ordinary toilet paper useful:
Acrylic colors of various shades
Various decoration items - for example, beads
Of course, bottle degreasing is an indispensable stage of
work. Now tear the toilet paper into pieces of , glue these pieces of the bottle with
IMPORTANT: Make the gluing process as if forming a background.
Now of paper should make strips of .It is desirable to choose the width within 1.5 centimeters. But the volume should be different - to do this, some stripes are created by two-layer
On the surface, pour a little water. Each strip is slightly wet in some places, and then twist the - and the liquid is distributed equally, and the strip does not get completely dry.
Similarly, make balls from toilet paper .However, the idea will only benefit from the use of salted dough. It is recommended that you plan in advance with a pencil the outline of the pattern
Allow the work to dry out. Thereafter can cover the bottle with paint
Add to the decor more elements optional
Decoupage bottles ribbons
There is an interesting way to decorate a bottle of with ribbons, twisted rollers. Only for this decoupage will need a bottle, ribbons and glue.
IMPORTANT: As for the number of tapes, you will have to stock up to 36 meters.
The principle of creating decoupage is simple:
Cut the tape into small pieces. Twist each piece into a roll
Glue rolls onto a bottle of .Beginning of work is recommended from the bottom
After the ribbons are glued, somewhat like a needle slightly straighten them. Try to make the bottle still shine through the decor elements
The neck also needs to be decorated. You can choose the easiest way by wrapping it with a ribbon and attaching the flower
But there is also a lot of other ways of beautifully and with a fantasy wrap around the bottles:
Decoupage of bottles with flowers
You can make a bottle not just with ribbons, but with ribbons in the form of flowers. And need to do the following things:
Contour silvery hue
process is the following:
To begin with, the bottle is degreased with varnish or alcohol
is now applied with
The bottle is covered with with acrylic paint
IMPORTANT:You can apply paint as a sponge or a brush. However, the most interesting effect is obtained when using a sponge - the surface becomes rough.
As long as the bottle dries, you can proceed with the manufacture of colors. The easiest way is just to string the pieces of tape on a needle and thread. The thread is stitched - the outlines of the flower are formed. Another way is to just fold the corners and burn the edges. The last action will ensure the soldering of the
Once the bottle has dried, can paste flowers. You can decorate them with beads and thin ribbons
The contour around the perimeter of the tapes shows the patterns
Bottle presented on some holiday- a gift, of course, is good in itself. However, you will agree, it will be much more pleasant to receive a unique thing, carefully made by someone's hands. In this case, decoupage is able to help even those who previously had no relation to needlework.